Cracent 发表于 2014-11-2 03:42:49

郁闷，搞了一整天的neo-6m了，还是不会

前几天入手了一块neo 6m，但是一直调不出来数据，在网上查了很多程序，但都不行，让我很是郁闷。
后来借鉴一位网友这样做了一下：
char data;
void setup()
{
Serial.begin(9600);
// gps.begin(9600);
}

void loop()
{
if(Serial.available() > 0) {
    data = Serial.read();
    Serial.print(data);
}
}

但出来的也不正确，$GPRMC,194100.00,V,,,,,,,011114,,,N*74
$GPVTG,,,,,,,,,N*30
$GPGGA,194100.00,,,,,0,00,99.99,,,,,,*6B
$GPGSA,A,1,,,,,,,,,,,,,99.99,99.99,99.99*30
$GPGSV,1,1,01,19,,,14*75
$GPGLL,,,,,194100.00,V,N*47
$GPRMC,194101.00,V,,,,,,,011114,,,N*75
$GPVTG,,,,,,,,,N*30
$GPGGA,194101.00,,,,,0,00,99.99,,,,,,*6A
$GPGSA,A,1,,,,,,,,,,,,,99.99,99.99,99.99*30
$GPGSV,1,1,01,19,,,15*74
$GPGLL,,,,,194101.00,V,N*46
$GPRMC,194102.00,V,,,,,,,011114,,,N*76
$GPVTG,,,,,,,,,N*30
$GPGGA,194102.00,,,,,0,00,99.99,,,,,,*69
$GPGSA,A,1,,,,,,,,,,,,,99.99,99.99,99.99*30
求教于高手，希望可以帮忙说一下问题在哪
顺便希望可以借鉴一下高手的程序怎么做，所以路过的一定要留名哦！

hi55234 发表于 2014-11-2 09:07:33

gps室内定位无力，有时间了，证明是窗边

防阳台上或空旷地方再试

Cracent 发表于 2014-11-2 15:23:54

hi55234 发表于 2014-11-2 09:07 static/image/common/back.gif
gps室内定位无力，有时间了，证明是窗边

防阳台上或空旷地方再试

果真，多谢哈！

Cracent 发表于 2014-11-10 23:40:58

#include <dht11.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <SHT1x.h>
int Alight = A0;    //定义变量光敏电阻AO=Analog in 0为电压读取端口。
int JDQX = 2;   //定义变量继电器X控制脚 PWM2电平输出端口
int DHT11PIN = 3;//DHT11 PIN 3 连接PWM 3
int JDQY = 4;
int Asoil = A1;
int JDQZ = 6;
int soilval = 900;
dht11 DHT11;


#define MenuPage 12

#define OLED_DC 7 //AO
#define OLED_CS 9 //CS
#define OLED_CLK 10 //D0 SC
#define OLED_MOSI 11 //D1 DI
#define OLED_RESET 8 //RES

Adafruit_SSD1306 oled(OLED_MOSI, OLED_CLK, OLED_DC, OLED_RESET, OLED_CS);

#if (SSD1306_LCDHEIGHT != 64)
#error("Height incorrect, please fix Adafruit_SSD1306.h!");
#endif

#define dataPin 14   
#define clockPin 15
SHT1x sht1x(dataPin, clockPin);



void setup() {
pinMode(JDQZ, OUTPUT);   
pinMode(Asoil, INPUT);      
digitalWrite(JDQZ,LOW);
pinMode(JDQX, OUTPUT);
Serial.begin(9600);
Serial1.begin(115200);
Serial1.println("DHT11 TEST PROGRAM ");
Serial1.print("LIBRARY VERSION: ");
Serial1.println(DHT11LIB_VERSION);
Serial1.println();
oled.begin(SSD1306_SWITCHCAPVCC);
oled.clearDisplay();   
oled.setTextColor(WHITE);
aa();
oled.clearDisplay();

}


void loop()
{
int sensorValue = analogRead(Asoil);
Serial.println(sensorValue);
if(analogRead(Asoil) > soilval)
{

   digitalWrite(JDQZ, HIGH);
delay(3000);         
digitalWrite(JDQZ, LOW);
//delay(300);
}
else
{
    digitalWrite(JDQZ,LOW);
//delay(300);
}

int lightval = analogRead(Alight);    //从传感器读取值
Serial.println(lightval);   //输出距离值                           
delay(1000);
   if(lightval<=500){      //512=2.5V，想让传感器敏感一些的时候，把数值调高，想让传感器迟钝的时候把数值调低。
    digitalWrite(JDQX, HIGH); //当val小于512(2.5V)的时候，led亮。
}
else{
    digitalWrite(JDQX, LOW);
}



Serial1.println("\n");

int chk = DHT11.read(DHT11PIN);

Serial1.print("Read sensor: ");
switch (chk)
{
    case DHTLIB_OK:
                Serial1.println("OK");
                break;
    case DHTLIB_ERROR_CHECKSUM:
                Serial1.println("Checksum error");
                break;
    case DHTLIB_ERROR_TIMEOUT:
                Serial1.println("Time out error");
                break;
    default:
                Serial1.println("Unknown error");
                break;
}
Serial1.print("Humidity (%): ");
Serial1.println((float)DHT11.humidity, 2);
Serial1.print("Temperature (oC): ");
Serial1.println((float)DHT11.temperature-2, 2);
//delay(2000);


   
DisplaySHT71();
}

/*
//light
//void setup() {
// Serial.begin(9600);
//pinMode(JDQX, OUTPUT);//使ledPin为输出模式
//}

void loop() {
int lightval = analogRead(Alight);    //从传感器读取值
Serial.println(lightval);   //输出距离值                           
delay(1000);
   if(lightval<=500){      //512=2.5V，想让传感器敏感一些的时候，把数值调高，想让传感器迟钝的时候把数值调低。
    digitalWrite(JDQX, HIGH); //当val小于512(2.5V)的时候，led亮。
}
else{
    digitalWrite(JDQX, LOW);
}
}
//temperature
//void setup()
//{
// Serial1.begin(115200);
// Serial1.println("DHT11 TEST PROGRAM ");
// //Serial1.print("LIBRARY VERSION: ");
// Serial1.println(DHT11LIB_VERSION);
// Serial1.println();
//}

void loop()
{
Serial1.println("\n");

int chk = DHT11.read(DHT11PIN);

Serial1.print("Read sensor: ");
switch (chk)
{
    case DHTLIB_OK:
                Serial1.println("OK");
                break;
    case DHTLIB_ERROR_CHECKSUM:
                Serial1.println("Checksum error");
                break;
    case DHTLIB_ERROR_TIMEOUT:
                Serial1.println("Time out error");
                break;
    default:
                Serial1.println("Unknown error");
                break;
}
Serial1.print("Humidity (%): ");
Serial1.println((float)DHT11.humidity, 2);
Serial1.print("Temperature (oC): ");
Serial1.println((float)DHT11.temperature-2, 2);
//delay(2000);
}
*/
void DisplaySHT71(void)
{
float temp_c;
float temp_f;
float humidity;
static unsigned char PROGMEM bmp1[] =
{
0x00,0x00,0x04,0x00,0x37,0xE0,0x0C,0x20,0x17,0xE0,0x54,0x20,0x14,0x20,0x17,0xE0,
0x28,0x10,0x2F,0xF0,0x6A,0x50,0x2A,0x50,0x2A,0x50,0x3F,0xF8,0x00,0x00,
};
static unsigned char PROGMEM bmp2[] =
{
0x00,0x00,0x01,0x00,0x21,0x18,0x3E,0xE0,0x24,0x40,0x3F,0xF8,0x24,0x40,0x23,0xC0,
0x20,0x20,0x27,0xE0,0x42,0x40,0x41,0x80,0x41,0x80,0x9E,0x78,0x00,0x00,/*"度",1*/
};
static unsigned char PROGMEM bmp3[] =
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x30,0x00,0x20,0x00,0x00,0x00,0x20,0x00,0x30,0x00,0x00,0x00,0x00,0x00,/*"：",2*/
};
static unsigned char PROGMEM bmp4[] =
{
0x00,0x00,0x04,0x10,0x27,0xF0,0x1C,0x10,0x17,0xF0,0x54,0x10,0x37,0xF0,0x21,0x40,
0x29,0x48,0x25,0x50,0x25,0x60,0x25,0x40,0x61,0x40,0x3F,0xF8,0x00,0x00,/*"湿",0*/
};
static unsigned char PROGMEM bmp5[] =
{
0x00,0x00,0x01,0x00,0x21,0x18,0x3E,0xE0,0x24,0x40,0x3F,0xF8,0x24,0x40,0x23,0xC0,
0x20,0x20,0x27,0xE0,0x42,0x40,0x41,0x80,0x41,0x80,0x9E,0x78,0x00,0x00,/*"度",1*/
};
static unsigned char PROGMEM bmp6[] =
{

0x00,0x00,0x00,0x00,0x31,0xC0,0x32,0x20,0x24,0x10,0x08,0x00,0x08,0x00,0x08,0x00,
0x08,0x00,0x08,0x00,0x04,0x00,0x06,0x30,0x03,0xC0,0x00,0x00,0x00,0x00,/*"℃",0*/
};
static unsigned char PROGMEM bmp9[] =
{
0x00,0x00,0x03,0x00,0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x00,0x3F,0xF0,0x02,0x00,
0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x00,0x3F,0xF8,0x00,0x00,0x00,0x00,/*"土",0*/
};
static unsigned char PROGMEM bmp10[] =
{
0x00,0x00,0x10,0x80,0x2F,0xF8,0x25,0x50,0x27,0xF0,0x73,0x70,0x21,0x20,0x27,0xF8,
0x21,0x50,0x2F,0xF0,0x71,0x90,0x02,0x60,0x06,0xA0,0x19,0x18,0x00,0x00,/*"壤",1*/
};
static unsigned char PROGMEM bmp7[] =
{
0x08,0x00,0x0B,0xF8,0x12,0x08,0x22,0x08,0x4B,0xF8,0x0A,0x08,0x12,0x08,0x33,0xF8,
0x52,0x44,0x92,0x48,0x12,0x30,0x12,0x20,0x12,0x10,0x12,0x88,0x13,0x06,0x12,0x00,/*"很",4*/

0x00,0x00,0x7F,0xFC,0x08,0x20,0x08,0x20,0x08,0x20,0x08,0x20,0x08,0x20,0xFF,0xFE,
0x08,0x20,0x08,0x20,0x08,0x20,0x08,0x20,0x10,0x20,0x10,0x20,0x20,0x20,0x40,0x20,/*"开",5*/

0x00,0x00,0x02,0x00,0x01,0x00,0x00,0x80,0x00,0x80,0x04,0x00,0x04,0x08,0x24,0x04,
0x24,0x04,0x24,0x02,0x44,0x02,0x44,0x12,0x84,0x10,0x04,0x10,0x03,0xF0,0x00,0x00,/*"心",6*/

0x00,0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10,0x00,
0x10,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x10,0x00,0x00,0x00,0x00,0x00,/*"！",7*/
};
static unsigned char PROGMEM bmp8[] =
{
0x01,0x00,0x01,0x00,0x02,0x80,0x04,0x40,0x08,0x20,0x12,0x10,0x21,0x08,0xC1,0x06,
0x00,0x00,0x1F,0xF0,0x00,0x10,0x00,0x20,0x00,0x20,0x00,0x40,0x00,0x80,0x01,0x00,/*"今",0*/

0x00,0x00,0x3F,0xF8,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0xFF,0xFE,0x01,0x00,
0x02,0x80,0x02,0x80,0x04,0x40,0x04,0x40,0x08,0x20,0x10,0x10,0x20,0x08,0xC0,0x06,/*"天",1*/

0x08,0x00,0x08,0x10,0x08,0x20,0x08,0x40,0x08,0x80,0x09,0x00,0x08,0x00,0xFF,0xFE,
0x0A,0x00,0x09,0x00,0x08,0x80,0x08,0x40,0x09,0x20,0x0A,0x18,0x0C,0x06,0x08,0x00,/*"长",2*/

0x08,0x00,0x0B,0xF8,0x12,0x08,0x23,0xF8,0x4A,0x08,0x0B,0xF8,0x10,0x00,0x33,0xFC,
0x50,0x10,0x97,0xFE,0x10,0x10,0x12,0x10,0x11,0x10,0x10,0x10,0x10,0x50,0x10,0x20,/*"得",3*/
};

// Read values from the sensor
temp_c = (float)DHT11.humidity;//sht1x.readTemperatureC();
//temp_f = sht1x.readTemperatureF();
humidity = (float)DHT11.temperature-2;//sht1x.readHumidity();

//oled.setTextSize(1);
oled.setTextColor(WHITE);
//oled.setCursor(0,8);
//oled.print("Temperature:");
oled.drawBitmap(40, 0,bmp1, 16,16, 1);
oled.drawBitmap(56, 0,bmp2, 16,16, 1);
oled.drawBitmap(72, 0,bmp3, 16,16, 1);
oled.setTextSize(2);
oled.setCursor(40,16);
oled.print(temp_c);
//oled.setTextSize(2);
//oled.setCursor(115,16);
//oled.print("C");
oled.drawBitmap(115, 16,bmp6, 16,16, 1);
//oled.setCursor(78,16);
//oled.print(temp_f);
//oled.setCursor(108,16);
//oled.print("F");

oled.drawBitmap(40, 32,bmp9, 16,16, 1);
oled.drawBitmap(56, 32,bmp10, 16,16, 1);
oled.drawBitmap(72, 32,bmp4, 16,16, 1);
oled.drawBitmap(88, 32,bmp5, 16,16, 1);
oled.drawBitmap(104, 32,bmp3, 16,16, 1);
oled.setTextSize(2);
oled.setCursor(40,48);
oled.println(humidity);
oled.setCursor(115,48);
oled.print("%");

oled.drawBitmap(0, 0,bmp8, 16,64, 1);
oled.drawBitmap(16, 0,bmp7, 16,64, 1);

oled.display();
delay(50);
oled.clearDisplay();

}

/*void setup()
{
oled.begin(SSD1306_SWITCHCAPVCC);
oled.clearDisplay();   
oled.setTextColor(WHITE);
aa();
oled.clearDisplay();

}

void loop()
{
//aa();
//delay(1000);
//oled.clearDisplay();
DisplaySHT71();
}*/
void aa()
{static unsigned char PROGMEM bmp11[] =
{ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x21,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x40,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x80,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x70,0x80,0x41,0x80,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0x00,0x00,
0x00,0x01,0x88,0x80,0x06,0x20,0x00,0x00,0x00,0x00,0x08,0xC1,0xF8,0x00,0x00,0x00,
0x00,0x02,0x04,0x80,0x08,0x10,0x00,0x00,0x00,0x00,0x10,0x43,0x0C,0x00,0x00,0x00,
0x00,0x04,0x02,0x80,0x58,0x08,0x00,0x00,0x00,0x18,0x10,0x44,0x04,0x00,0x00,0x00,
0x00,0x04,0x00,0x80,0x50,0x08,0x00,0x00,0x00,0x3E,0x30,0x48,0x04,0x00,0x00,0x00,
0x00,0x04,0x01,0x80,0x60,0x04,0x00,0x00,0x00,0x61,0x20,0x50,0x08,0x00,0x00,0x00,
0x00,0x04,0x00,0x80,0x60,0x04,0x00,0x00,0x00,0x60,0xA0,0x50,0x08,0x00,0x00,0x00,
0x00,0x04,0x00,0xC0,0x40,0x08,0x00,0x00,0x00,0x20,0x60,0x60,0x10,0x00,0x00,0x00,
0x00,0x06,0x00,0x40,0xC0,0x08,0x00,0x00,0x00,0x20,0x20,0x40,0x20,0x00,0x00,0x00,
0x00,0x02,0x00,0x40,0x80,0x10,0x00,0x00,0x00,0x30,0x20,0xC0,0x40,0x00,0x00,0x00,
0x00,0x01,0x00,0x60,0x80,0x20,0x00,0x00,0x00,0x10,0x10,0xC0,0xC7,0x00,0x00,0x00,
0x00,0x3C,0x80,0x21,0x80,0x4F,0x80,0x00,0x00,0x18,0x10,0x81,0xB8,0xC0,0x00,0x00,
0x00,0xC1,0xE0,0x21,0x00,0xE0,0x40,0x00,0x00,0x08,0x10,0x83,0xC0,0x60,0x00,0x00,
0x00,0x80,0x70,0x3F,0x83,0x80,0x20,0x00,0x00,0xC4,0x00,0x07,0x00,0x20,0x00,0x00,
0x01,0x00,0x1C,0xC0,0x66,0x00,0x20,0x00,0x0C,0x1E,0x1D,0xCC,0x00,0x20,0x00,0x00,
0x01,0x00,0x07,0x80,0x38,0x00,0x20,0x00,0x10,0x01,0x40,0x28,0x00,0x60,0x00,0x00,
0x01,0x00,0x03,0x31,0x90,0x00,0x20,0x00,0x20,0x00,0x80,0x10,0x00,0xC0,0x00,0x00,
0x01,0x00,0x02,0x31,0x88,0x00,0x20,0x00,0x20,0x01,0x33,0x10,0x03,0x80,0x00,0x00,
0x01,0x00,0x02,0x20,0x08,0x00,0x20,0x00,0x20,0x02,0x33,0x00,0x1C,0x00,0x00,0x00,
0x00,0x80,0x02,0x00,0x08,0x00,0x20,0x00,0x30,0x02,0x00,0x01,0xFC,0x00,0x00,0x00,
0x00,0x40,0x06,0x00,0x08,0x00,0xC0,0x00,0x0F,0xFC,0x00,0x0C,0x03,0x80,0x00,0x00,
0x00,0x3F,0xFE,0xC0,0x4F,0xFF,0x00,0x00,0x00,0xC0,0x41,0x10,0x00,0x40,0x00,0x00,
0x00,0x03,0x82,0x40,0x58,0x70,0x00,0x00,0x03,0x00,0x73,0x10,0x00,0x20,0x00,0x00,
0x00,0x0C,0x01,0x3B,0x90,0x0C,0x00,0x00,0x06,0x02,0x3E,0x20,0x00,0x10,0x00,0x00,
0x00,0x10,0x01,0x8E,0x20,0x03,0x00,0x00,0x04,0x02,0x00,0x20,0x00,0x10,0x00,0x00,
0x00,0x20,0x00,0xC0,0xE0,0x01,0x80,0x00,0x08,0x02,0x00,0x50,0x00,0x20,0x00,0x00,
0x00,0x40,0x01,0x3F,0xB0,0x00,0x80,0x00,0x10,0x01,0x01,0x0C,0x00,0x60,0x00,0x00,
0x00,0x40,0x02,0x04,0x10,0x00,0x00,0x00,0x10,0x02,0xC6,0x07,0x01,0xC0,0x00,0x00,
0x00,0x40,0x06,0x04,0x08,0x00,0x00,0x00,0x20,0x0C,0x00,0x02,0xFF,0x00,0x00,0x00,
0x00,0x40,0x0C,0x04,0x0C,0x00,0x80,0x00,0x20,0x3C,0x06,0x02,0x80,0x00,0x00,0x00,
0x00,0x00,0x18,0x04,0x06,0x00,0x80,0x00,0x20,0x68,0x06,0x01,0x80,0x00,0x00,0x00,
0x00,0x20,0x28,0x04,0x03,0x01,0x00,0x00,0x10,0x88,0x06,0x01,0x40,0x00,0x00,0x00,
0x00,0x10,0xD0,0x04,0x02,0xC1,0x00,0x00,0x1F,0x08,0x06,0x01,0x40,0x00,0x00,0x00,
0x00,0x0F,0x10,0x0C,0x01,0x3C,0x00,0x00,0x00,0x08,0x09,0x01,0x40,0x00,0x00,0x00,
0x00,0x00,0x20,0x0C,0x01,0x00,0x00,0x00,0x00,0x08,0x09,0x01,0x40,0x00,0x00,0x00,
0x00,0x00,0x20,0x0C,0x01,0x00,0x00,0x00,0x00,0x08,0x18,0x81,0x40,0x00,0x00,0x00,
0x00,0x00,0x20,0x08,0x00,0x00,0x00,0x00,0x00,0x0C,0x10,0x42,0x40,0x00,0x00,0x00,
0x00,0x00,0x20,0x0A,0x01,0x00,0x00,0x00,0x00,0x04,0x20,0x36,0x00,0x00,0x00,0x00,
0x00,0x00,0x20,0x1A,0x01,0x00,0x00,0x00,0x00,0x03,0xC0,0x0C,0x80,0x00,0x00,0x00,
0x00,0x00,0x10,0x1B,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x80,0x00,0x00,0x00,
0x00,0x00,0x0C,0x6A,0x84,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x80,0x00,0x00,0x00,
0x00,0x00,0x03,0x8A,0x78,0x00,0x00,0x00,0x00,0x00,0x00,0x09,0x3F,0xC0,0x00,0x00,
0x00,0x00,0x00,0x0A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x11,0xC4,0x70,0x00,0x00,
0x00,0x40,0x00,0x0A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x13,0x1F,0x68,0x00,0x00,
0x00,0x60,0x00,0x0A,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x27,0x31,0xE4,0x00,0x00,
0x00,0x5C,0x00,0x0A,0x00,0x03,0xC0,0x00,0x00,0x00,0x00,0x24,0xC0,0x62,0x00,0x00,
0x00,0x41,0x80,0x0A,0x00,0x1C,0x40,0x00,0x00,0x00,0x00,0x4C,0x41,0xD3,0x00,0x00,
0x00,0x40,0x30,0x0A,0x00,0xE0,0x40,0x00,0x00,0x00,0x00,0x48,0x6F,0x0C,0x80,0x00,
0x00,0x40,0x0C,0x0A,0x03,0x00,0x40,0x00,0x00,0x00,0x00,0x90,0x38,0x0E,0x40,0x00,
0x00,0x40,0x03,0x0A,0x0C,0x00,0x40,0x00,0x00,0x00,0x00,0x90,0x10,0x3B,0x60,0x00,
0x00,0x00,0x00,0xCA,0x30,0x00,0x40,0x00,0x00,0x00,0x01,0x20,0x08,0xF0,0x70,0x00,
0x00,0x20,0x00,0x2A,0xC0,0x00,0x00,0x00,0x00,0x00,0x01,0x20,0x0F,0xC0,0xC0,0x00,
0x00,0x20,0x00,0x1B,0x00,0x00,0x80,0x00,0x00,0x00,0x03,0x40,0x03,0x0F,0x00,0x00,
0x00,0x20,0x00,0x0A,0x00,0x00,0x80,0x00,0x00,0x00,0x02,0x40,0x00,0x70,0x00,0x00,
0x00,0x10,0x00,0x06,0x00,0x00,0x80,0x00,0x00,0x00,0x02,0x80,0x00,0x00,0x00,0x00,
0x00,0x08,0x00,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x04,0x80,0x00,0x00,0x00,0x00,
0x00,0x04,0x00,0x04,0x00,0x02,0x00,0x00,0x00,0x00,0x04,0x80,0x00,0x00,0x00,0x00,
0x00,0x03,0x00,0x0A,0x00,0x0C,0x00,0x00,0x00,0x00,0x04,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"C:\Users\Vincent\Desktop\22.bmp",0*/
};

oled.drawBitmap(0, 0,bmp11, 128,64, 1);
oled.display();
}

引力波 发表于 2014-11-23 13:44:14

Cracent 发表于 2014-11-10 23:40 static/image/common/back.gif


我最近也在搞这个，代码里的头文件在哪啊？
页: [1]
查看完整版本: 郁闷，搞了一整天的neo-6m了，还是不会