This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
Arduino: 1.0.6 (Windows 7), Board: "Arduino Uno"
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: error: programm enable: target doesn't answer. 1
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check. suoma 发表于 2017-4-17 13:49
使用淘宝USB ASP下载器，报错如下，
淘宝的usb asp用的不是开源的usb asp固件，你得刷了开源的asp固件才能用。 弘毅 发表于 2017-4-17 14:27
淘宝的usb asp用的不是开源的usb asp固件，你得刷了开源的asp固件才能用。
如下，买的时候已经带固件了啊，
suoma 发表于 2017-4-17 14:46
如下，买的时候已经带固件了啊，
淘宝上卖的asp，默认固件都是配合盗版软件的，中国没有使用开源软件习惯，因为商业软件始终比开源的好用，所以商家都是刷的配合盗版软件的固件。 弘毅 发表于 2017-4-17 16:58
淘宝上卖的asp，默认固件都是配合盗版软件的，中国没有使用开源软件习惯，因为商业软件始终比开源的好用 ...
This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
Arduino: 1.0.6 (Windows 7), Board: "Arduino Uno"
avrdude: stk500_program_enable(): protocol error, expect=0x14, resp=0x50
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51
按楼主的方法报如上错误
This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
Arduino: 1.0.6 (Windows 7), Board: "Arduino Uno"
avrdude: stk500_program_enable(): protocol error, expect=0x14, resp=0x50
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51
烧了两次均报如下错误
页:
1
[2]