1140897872 发表于 2018-5-6 10:16:27

求助--arduino 烧录不成功

Arduino:1.8.6 Hourly Build 2018/04/29 03:33 (Windows 10), 开发板："Arduino/Genuino Uno"


项目使用了 4154 字节，占用了 (12%) 程序存储空间。最大为 32256 字节。
全局变量使用了250字节，(12%)的动态内存，余留1798字节局部变量。最大为2048字节。
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x0d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x0d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x0d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x0d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x0d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x0d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x0d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x0d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x0d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x0d
上传出错。查看http://www.arduino.cc/en/Guide/Troubleshooting#upload 获取建议。


在文件 -> 首选项开启
“编译过程中显示详细输出”选项
这份报告会包含更多信息。

1140897872 发表于 2018-5-6 10:17:23

急急如律令，召唤老司机

zyzand 发表于 2018-5-8 13:29:31

信息是未收到任何回应的意思，可能是你的线没接好或者串口选错了，或者在开始上传的一瞬间按下复位键试试，如果是Arduino UNO的话应该会自动复位的。

风雪独步人 发表于 2018-5-19 19:05:32

现在谁还烧录啊，用自带的ide，直接就拷贝到arduino中去了。

山川木白 发表于 2018-6-8 18:40:35

用Arduloader，烧录固件，我用的就是这个，烧录hex文件
页: [1]
查看完整版本: 求助--arduino 烧录不成功