enc28j60 和 nrf24l01+ 同时使用如何实现？
参考了前辈们的文章：http://www.geek-workshop.com/forum.php?mod=viewthread&tid=2520
http://www.geek-workshop.com/forum.php?mod=viewthread&tid=1228
想做个室外温度采集，采集端用的是一块arduino mini，温度感应模块采集温度数据然后用nrf24l01传送给接收端，接收端是arduino uno，nrf24l01接到数据后由enc28j60网络模块上传到yeelink，自己试着整合了一下代码，但是通不过编译，跪求大神指点啊！！！ (编译环境1.01）
#include "SPI.h"
#include "Mirf.h"
#include "nRF24L01.h"
#include "MirfHardwareSpiDriver.h"
#include <EtherCard.h>
#define OUT
#define REQUEST_RATE 10000 // milliseconds
#define SENSOR1 4
#define SENSOR2 5
#define SENSOR3 6
#define LANcsPin 8
#define RFcsPin 10
int data;
int aaa;
int aaaa;
// ethernet interface mac address
static byte mymac[] = {
0x74,0x69,0x69,0x2D,0x30,0x31 };
// remote website name
char website[] PROGMEM = "api.yeelink.net";
char urlBuf[] PROGMEM = "/v1.0/device/2464/sensor/3315/datapoints";
char apiKey[] PROGMEM = "U-ApiKey: -------------------------------------------";
byte Ethernet::buffer;
static long timer;
// called when the client request is complete
static void my_result_cb (byte status, word off, word len) {
Serial.print("<<< reply ");
Serial.print(millis() - timer);
Serial.println(" ms");
Serial.println((const char*) Ethernet::buffer+off);
}
void setup () {
SPI.begin();
pinMode(LANcsPin,OUTPUT);
pinMode(RFcsPin,OUTPUT);
Serial.begin(9600);
Serial.println("");
digitalWrite(RFcsPin,HIGH);
digitalWrite(LANcsPin,LOW);
randomSeed(analogRead(0));
if (ether.begin(sizeof Ethernet::buffer, mymac) == 0)
Serial.println( "Failed to access Ethernet controller");
if (!ether.dhcpSetup())
Serial.println("DHCP failed");
ether.printIp("My IP: ", ether.myip);
// ether.printIp("Netmask: ", ether.mymask);
ether.printIp("GW IP: ", ether.gwip);
ether.printIp("DNS IP: ", ether.dnsip);
if (!ether.dnsLookup(website))
Serial.println("DNS failed");
ether.printIp("Server: ", ether.hisip);
timer = - REQUEST_RATE; // start timing out right away
digitalWrite(LANcsPin,HIGH);
digitalWrite(RFcsPin,LOW);
Mirf.spi = &MirfHardwareSpi; //加载24L01SPI
Mirf.init();
Mirf.setRADDR((byte *)"serv1");//接收到"接收地址"
Mirf.payload = sizeof(int); //接收类型（整数）
Mirf.config();
}
void loop () {
if(Mirf.dataReady()){
Mirf.getData((byte *)&data); //接收数据
aaa = data;
Mirf.rxFifoEmpty();
}
delay(10);
digitalWrite(RFcsPin,HIGH);
digitalWrite(LANcsPin,LOW);
ether.packetLoop(ether.packetReceive());
if ((millis() > timer + REQUEST_RATE) && !aaa == aaaa) {
aaaa = aaa;
timer = millis();
Serial.println(">>> REQ");
static char buf;
get_send_string(buf);
if (!ether.dnsLookup(website))
Serial.println("DNS failed");
ether.printIp("Server: ", ether.hisip);
ether.httpPost (urlBuf, website, apiKey, buf, my_result_cb);
}
}
void get_send_string(OUT char *p){
if (!aaaa == 1111){
uint16_t whole = 50;
sprintf(p,"{\"value\":%d}",whole);}
else{
uint16_t whole = 0;
sprintf(p,"{\"value\":%d}",whole);}
} 我不是大神。。。不过你没说你编译没过时错误代码是什么啊
页:
[1]