程序烧不进去
本帖最后由 Mat 于 2014-4-4 21:06 编辑用别人的电脑可以烧入程序，我觉得应该不是板子的问题。
每次点完upload,电脑的设备管理器原有的arduino lilypad usb串口 会变成 Pro micro，然后又变回 arduino lilypad usb串口。
程序烧到一部分后无法继续。
我插拔了几次，也换了几个串口都不行。我用的Arduino IDE 1.5.6-r2,但用别人的电脑就可以烧入，感到很奇怪。
错误代码
Sketch uses 5,524 bytes (19%) of program storage space. Maximum is 28,672 bytes.
Global variables use 157 bytes (6%) of dynamic memory, leaving 2,403 bytes for local variables. Maximum is 2,560 bytes.
Forcing reset using 1200bps open/close on port COM8
PORTS {COM8, } / {COM8, } => {}
PORTS {COM8, } / {COM8, } => {}
PORTS {COM8, } / {COM8, } => {}
PORTS {COM8, } / {COM8, } => {}
PORTS {COM8, } / {COM8, } => {}
PORTS {COM8, } / {COM8, } => {}
PORTS {COM8, } / {COM8, } => {}
PORTS {COM8, } / {COM8, } => {}
PORTS {COM8, } / {COM8, } => {}
PORTS {COM8, } / {COM8, } => {}
PORTS {COM8, } / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {COM8, } => {COM8, }
Found upload port: COM8
C:\Program Files (x86)\Arduino/hardware/tools/avr/bin/avrdude -CC:\Program Files (x86)\Arduino/hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega32u4 -cavr109 -PCOM8 -b57600 -D -Uflash:w:C:\Users\lenovo\AppData\Local\Temp\build7185759348644319422.tmp/Fade.cpp.hex:i
avrdude: Version 5.11, compiled on Sep2 2011 at 19:38:36
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "C:\Program Files (x86)\Arduino/hardware/tools/avr/etc/avrdude.conf"
Using Port : COM8
Using Programmer : avr109
Overriding Baud Rate : 57600
AVR Part : ATmega32U4
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay SizeIndx PagedSize Size #Pages MinWMaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 10 8 0 no 1024 8 090009000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay SizeIndx PagedSize Size #Pages MinWMaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
flash 65 6 128 0 yes 32768128 25645004500 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay SizeIndx PagedSize Size #Pages MinWMaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
lfuse 0 0 0 0 no 1 0 090009000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay SizeIndx PagedSize Size #Pages MinWMaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
hfuse 0 0 0 0 no 1 0 090009000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay SizeIndx PagedSize Size #Pages MinWMaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
efuse 0 0 0 0 no 1 0 090009000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay SizeIndx PagedSize Size #Pages MinWMaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
lock 0 0 0 0 no 1 0 090009000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay SizeIndx PagedSize Size #Pages MinWMaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay SizeIndx PagedSize Size #Pages MinWMaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : butterfly
Description : Atmel AppNote AVR109 Boot Loader
Connecting to programmer: .avrdude: Send: .
avrdude: Send: S
avrdude: Recv:
avrdude: Recv:
avrdude: Send: V
avrdude: Recv:
avrdude: Send: v
avrdude: Recv:
avrdude: Recv:
avrdude: Send: p
avrdude: Recv:
Found programmer: Id = "?("; type = ?
Software Version = E.；Hardware Version = ?
avrdude: Send: a
avrdude: Recv:
avrdude: Send: b
avrdude: Recv:
avrdude: error: buffered memory access not supported. Maybe it isn't
a butterfly/AVR109 but a AVR910 device?
processing.app.debug.RunnerException
at cc.arduino.packages.uploaders.SerialUploader.uploadUsingPreferences(SerialUploader.java:125)
at processing.app.Sketch.upload(Sketch.java:1719)
at processing.app.Sketch.exportApplet(Sketch.java:1625)
at processing.app.Sketch.exportApplet(Sketch.java:1597)
at processing.app.Editor$DefaultExportHandler.run(Editor.java:2397)
at java.lang.Thread.run(Unknown Source)
Caused by: processing.app.debug.RunnerException: Problem uploading to board.See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
at cc.arduino.packages.Uploader.executeUploadCommand(Uploader.java:111)
at cc.arduino.packages.uploaders.SerialUploader.uploadUsingPreferences(SerialUploader.java:123)
... 5 more
页:
[1]