Arduino pro mini下载程序不成功
确保连线正确，而且版型和串口号都已选择好，下载完后显示如图片所示，显示成功，但是好像根本就没下载到板子里面，请教高手这是什么原因？ 你可以先试一下自带的Blink程序。/*Blink
Turns on an LED on for one second, then off for one second, repeatedly.
This example code is in the public domain.
*/
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;
// the setup routine runs once when you press reset:
void setup() {
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
}
// the loop routine runs over and over again forever:
void loop() {
digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
} 如果你手头有UNO，可以用UNO来接它写入程序，又方便又安全 谢谢大家的指点。现在已经确定，这样也是下载成功的，就是不知道为什么这样显示
页:
[1]