关于sd卡创建文件时用变量当文件名问题

suoma

zjz5717 发表于 2016-9-27 20:04
前面应该会提示错误原因的来源，也有可能是库文件位置或者选择出了问题

在我的另一个电脑上使用你的库中例程“Files”编译报错如下，IDE版本1.0.6

1.   This report would have more information with
   
2.   "Show verbose output during compilation"
   
3.   enabled in File > Preferences.
   
4. Arduino: 1.0.6 (Windows 7), Board: "Arduino Uno"
   
5. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp:27: error: 'SPISettings' does not name a type
   
6. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp: In member function 'void Sd2Card::chipSelectHigh()':
   
7. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp:167: error: 'class SPIClass' has no member named 'endTransaction'
   
8. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp: In member function 'void Sd2Card::chipSelectLow()':
   
9. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp:176: error: 'class SPIClass' has no member named 'beginTransaction'
   
10. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp:176: error: 'settings' was not declared in this scope
    
11. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp: In member function 'uint8_t Sd2Card::init(uint8_t, uint8_t)':
    
12. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp:269: error: 'settings' was not declared in this scope
    
13. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp:269: error: 'SPISettings' was not declared in this scope
    
14. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp:275: error: 'class SPIClass' has no member named 'beginTransaction'
    
15. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp:279: error: 'class SPIClass' has no member named 'endTransaction'
    
16. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp: In member function 'uint8_t Sd2Card::setSckRate(uint8_t)':
    
17. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp:518: error: 'settings' was not declared in this scope
    
18. D:\Arduino\libraries\SD\src\utility\Sd2Card.cpp:518: error: 'SPISettings' was not declared in this scope

复制代码

suoma

关于我的文件名变量方式建立还是没能实现，还是感谢一直关注这个问题

suoma

zjz5717 发表于 2016-9-27 20:04
前面应该会提示错误原因的来源，也有可能是库文件位置或者选择出了问题

谢谢，今天成功使用变量命名SD卡文件